FOR SALE
(scroll
down to see details for each item)
Honda rs125 – ready to race!
Wells Cargo Road Force 8x16 Fully Enclosed Race-Outfitted Trailer **
1997 Honda rs125 Rolling Chassis
Honda rs125 Swingarm
Honda rs125 Gas Tank
BPS Dynamic Ignition Curve “Bender”
PAX Powerjet Carburetor
** Package
Price Available for Bike and Trailer!
Contact Joe for info:
617-828-0201
jmelchionda@hotmail.com
All
items located in Boston MA
Prices
are somewhat negotiable
Honda rs125r
This bike is FAST, and best of all, COMPLETELY READY TO RACE. Put some new tires on, gas it and
go!
Basics
- 1995
frame
- 1996
suspension and swingarm
- 2000
engine
Engine
- FRESHLY
REBUILT WITH 0 HOURS (will need break-in)
- Matched,
stuffed cases
- Matched
and slightly ported cylinder
- VHM
cylinder head with leaded and unleaded inserts from 10.00cc - 10.80cc
- Talon
billet clutch basket
- Modified
exhaust manifold (o-ring style)
- Detonation
counter
- Full
jetting (including leaded and unleaded needles. currently set up for
leaded fuel)
- 1997
exhaust pipe, carbon silencer
Frame/Body/Suspension
- Radial
brake lever/master cylinder (one finger stoppies!!)
- Marchesini
wheels
- Sebimoto
carbon-kevlar seat, fairings and airbox (side scoop style, only throttle
cable runs through it)
- Battle
Factory semi-automatic upshifter
- Stiffer
rear spring, and valved front suspension; set up for 160lb rider
- Frame
sliders
- Rear
wheel hugger
Misc
- Stock
wheels with rain tires mounted
- Tire
warmers
- Front
and rear stands
- Manual
- Supplementary
Manual (on CD)
- Jetting
notes, and extra tuning info
- Misc
spares (including crash spares)
- Full
set of external gearing
- Short
internal 1st gear
No tools included
The fairings show some wear as they've been on the bike for
a couple years, but have never been down. Paint on the marchesini rims is worn
out/flaked.
Bike
Pic 1
Bike
Pic 2
Bike
Pic 3
Bike
Pic 4
Price: $6,800.00
Note: Price does NOT
include shipping. If necessary,
crating and shipping will be done via Rising Sun Cycles. Cost TBD
Wells
Cargo Road Force 8x16 Fully Enclosed Trailer
(RF8162, Level P2 package)
Set up for motorcycle racing and will hold 4 gp bikes
comfortably. I’ve fit 3 gp bikes and an R1 superbike in with no problem
as well.
Basics
- Dual
axle with electric brakes
- 7000lb
GVWR
- Side
door with full size lockbar
- Rear
ramp door with spring assist and full size lockbar
- Front
stone guard
- Retractable
stabilizer feet
- Fixed
jack
- Vented
- Switched
internal vehicle powered lights
Wheel bearings changed every year, lubed multiple times per
season.
Modifications
- External
outlet for power. Just plug a
normal 3-prong extension cord in the front receptacle and have lights and
outlets. No need to run cord
through door crack
- 3
switched overhead lights
- Outlets
wired for 20A for tire warmers
- L-shaped
workbench in front with vice
- 3
sets undercounter toolboxes, permanently mounted
- 1
benchtop toolbox, permanently mounted
- 3
dual-door cabinets mounted on left wall.
- 3
e-trak strips on floor
- 1
e-trak strip on each wall
- 4
removable wheel chocks
- Removable
floor mounted eye bolts in front
Accessories
- Lots
of e-trak clips (and some add'l short e-trak sections)
- 4
removable wheel chocks
- Full-size
spare tire
- Hitch
lock
- High
security door locks (keyed the same).
- Collapsible
track cart
- Misc
stuff (fire extinguisher, corkboard, shop towel rack, mag-light clips,
etc)
Trailer
Pic 1
Trailer
Pic 2
Trailer
Pic 3
Price: $4,500.00
!!!! Buy the racebike and trailer
as a package for $10,800.00
!!!!
1997 Honda rs125 Rolling Chassis SOLD
As pictured.
- Frame,
swingarm, suspension, brakes, stock wheels
- Gas
tank and stock non-airbox fairings are included.
- No engine, or
electronics.
- Also
missing some little parts, like engine mount bolts, etc
Chassis
Pic 1
Chassis
Pic 2
Price: $3,000.00
Note: Price does NOT
include shipping. If necessary, crating and shipping as a complete unit will be done
via Rising Sun Cycles. Disassembly and shipping as multiple packages also possible. Cost TBD.
Honda rs125 Swingarm
- Welds
had cracked where cast section meets aluminum arms. Aligned and repaired by Kevin
Murray of MCE Racing
- Aluminum
arms show surface grinding, but it’s the same as a brand new
swingarm!
- Comes
with pivot bearings & spacers, shock bearing & seals, chain
sliders and chain adjusters
Swingarm
Pic
Price: $400.00 (includes shipping to anywhere in continental US)
Honda rs125 Gas Tank
- Post-96
style, but before the version that has the molded helmet indentation
- Painted
black, never used since paint job
- Comes
with petcock, but no gas cap
Gas
Tank Pic
Price: $250.00 (includes
shipping to anywhere in continental US)
BPS Dynamic Ignition Curve “Bender” SOLD
- Works
on Honda rs125 and Yamaha tz125
- Dynamically
changes ignition timing based on RPM.
- Easily
installed, and works with existing ignition system.
Note: This is not the
new 16-setting bender, this is the original. Info can be found here:
http://sp125racing.com/Ignition%20Curve%20Bender.htm
Price: $150.00 (includes
shipping to anywhere in continental US)
PAX Powerjet Carburetor
- Came
off a Honda rs125
- Comes
with misc wiring, including controller module
NOTE: The carb
physically works, but I have never hooked it up and don’t know if the
electronics with it work, or are even complete. Basically you are buying the carb. (which will
work without using powerjet while you figure out electronics)
PAX Carb
Pic
Price: $600.00 (includes
shipping to anywhere in continental US)